What ERR_NETWORK_CHANGED Means in Chrome
Chrome stops loading pages and shows err_network_changed when your connection shifts while a request is still open. The error page displays two distinct lines: “Your connection was interrupted” and “A network change was detected.” Because Chrome saw your network setup change mid-load, it dropped the active request. Put simply, you have an active connection, but it has stopped working for the moment. The fault sits in your IP address, network settings, or a proxy, and none of that requires a call to your Internet Service Provider.
The good news is that your link still exists. It broke for a moment, which means you can repair it. While Microsoft Edge, Mozilla Firefox, and other browsers can hit the exact same fault under a different warning message, only Chrome labels it err_network_changed. If you are seeing a completely different code, verify that your service is up and running. A dead line throws the net::err_internet_disconnected message instead, and the only cure there is waiting or calling your provider.
What Causes ‘A Network Change Was Detected’?
In most cases, the IP address is the root cause. Chrome cannot reach any remote server without a stable IP address. The primary reasons behind these sudden network disruptions include:
- Sudden IP swap: The router or ISP hands your device a new address mid-session.
- DNS failure: The system cannot properly turn a site name into its corresponding IP address.
- Proxy or VPN shift: A tunnel reconnects or changes servers while a page is still loading.
- Two active adapters: Wi-Fi and Ethernet both stay turned on, causing Windows to flip randomly between them.
This fault sometimes fades entirely on its own. However, applying specific troubleshooting steps will get your browser working much faster.
5 Ways to Fix ERR_NETWORK_CHANGED on Windows and Mac
Start with your router and work your way down. Test Google Chrome after completing each step so you know exactly which action resolved the issue.
1. Unplug the Router for 60 Seconds
Pull the router’s power plug from the wall and wait a full minute. Plug it back in and give it one to two minutes to fully boot up. Check that the wireless light is active before you reload Chrome. For many users, this simple step alone clears the error code.
2. Flush DNS and Reset Winsock With 4 Commands
Next, give your computer a fresh IP address and wipe its stored DNS records. Windows saves past lookups so it can skip repeat requests, but a stale entry can send Chrome in the wrong direction. That stored cache behaves a lot like browser data, which you can wipe with Chrome’s cache and cookie cleanup.
Search for cmd in your search bar, right-click Command Prompt, and select Run as administrator. Enter each command line below, pressing Enter after every single one:
- ipconfig /flushdns
- nbtstat -R
- netsh int ip reset
- netsh winsock reset
Restart your PC so the reset takes full hold. Chrome also keeps its own internal host list, which you can empty by navigating to the chrome://net-internals/#dns page in your browser. Mac users can skip the Terminal completely by opening System Settings, selecting Network, removing the Wi-Fi or Ethernet service, and adding it back.
3. Clear the Proxy Tick in LAN Settings
A proxy sits directly between your computer and remote servers. Unlike a virtual private network, a proxy routes only chosen traffic, such as specific applications. SOCKS5 proxies trade connection speed for user privacy, while HTTP proxies can open blocked websites. Like any middleman, a proxy can break the link.
On Windows, open the Start menu, type “internet options,” and open the result. Navigate to the Connections tab and click on LAN settings. If “Use a proxy server for your LAN” has a checkmark, clear it for now. Keep “Automatically detect settings” turned on, press OK, and reload Chrome. If the error is gone, the proxy caused it, so pause it or select another option. On a Mac, open System Settings, choose Network, pick your service, click Details, and select Proxies. Chromebook owners can follow standard steps to remove a Chromebook proxy.
4. Set IPv4 DNS Back to Automatic
Each time you open a website, Chrome asks a DNS server for the matching IP address. Most devices use the ISP’s default server, but a bad custom entry can trigger the network error.
Open Network Status, select Advanced network settings, and then go to Change adapter options. Find the active link that carries your Wi-Fi name, right-click it, and select Properties. Choose Internet Protocol Version 4 (TCP/IPv4) and click Properties. Select “Obtain an IP address automatically” and “Obtain DNS server address automatically.” Press OK and test Chrome. If you prefer to keep a custom server, swap to a public resolver for now, such as Google’s 8.8.8.8 and 8.8.4.4.
5. Disconnect the VPN or Second Adapter
A VPN that reconnects or jumps across servers moves your traffic to a brand-new route. Every single request in flight fails at that exact moment. Turn your VPN off and reload the page to test the connection. Laptops plugged into an Ethernet cable while Wi-Fi remains turned on can also bounce erratically between the two networks. Disable whichever network adapter you do not actively need.
Why ERR_NETWORK_CHANGED Keeps Coming Back
A repeat error points directly to a link that keeps shifting beneath your feet. Wi-Fi hopping back and forth between the 2.4 GHz and 5 GHz frequency bands is a common culprit. An adapter cycling continuously on and off, or a router handing out new addresses through DHCP, will also cause recurrent dropouts.
The router itself might be failing due to old firmware, limited memory, or overheating that cuts live network sessions. Two different devices holding the exact same IP address will cause an internal conflict as well. Update your router firmware, and check Chrome under Help and About Google Chrome to ensure your browser is up to date.
Frequently Asked Questions
Does err_network_changed mean my internet is down?
No. It means your connection changed while a webpage was loading. Your internet still works in most cases, and a simple page reload often brings the site back immediately.
Can a VPN cause err_network_changed?
Yes. A VPN that reconnects, swaps servers, or changes routing rules shifts your traffic to a new path. Chrome drops any open request when this happens. Turn your VPN off and reload to confirm.
How do I stop err_network_changed from coming back?
Fix the unstable part of your network link. Disable unused Wi-Fi or Ethernet adapters, stay on a single VPN server, update your router firmware, and set your DNS settings back to automatic.
Why do I get err_network_changed on Reddit?
The code stems entirely from your own local connection, not from Reddit’s servers. Reddit happened to be the page loading when your IP address or VPN route shifted. Reload the page, and if it repeats, check your network.
Is err_network_changed caused by a virus?
Rarely. IP, DNS, proxy, and VPN changes cause nearly every single case. However, you should run a malware scan if unknown software keeps adding unauthorized proxy entries to your system settings.


































